Cheapest 💯 Traxxas EZ-Peak 3S “Completer Pack” Dual Multi-Chemistry Battery Charger w/Two Power Cell Batteries (5000mAh) 🛒

This is the Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger System with two included “Power Cell” Batteries. This charging system uses the Traxxas iD Battery Identification and is a great solution if you need batteries and a charger for a Traxxas vehicle requiring two 3S LiPo batteries; such as the X-MAXX Monster Truck and X0-1 Supercar. Even if your Traxxas vehicle requires only one battery, you can still take advantage of this system and have two batteries for use.

iD Simplicity
With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience.

Traxxas’ Most Powerful Charger
Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.

 

TRA2972 Charger Specifications:
AC Input: 100–240 Volts
Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–3 Cells
Net Weight: 575g
Dimensions: 176x138x57mm

TRA2872X Battery Specifications:
Type: LiPo
Total Capacity: 5000
Voltage: 11.1
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 155x26x44mm
Weight: 13.3oz (376g) 

Includes: 

• (1) TRA2972: Dual iD Battery Charger
• (2) TRA2872X: 5000mAh 3S 25C LiPo Battery w/iD

This product was added to our catalog on January 13, 2016